Texas Speed Dual Spring Cam Package for Cathedral Port Heads (LS1/LS2/LS6)

This Package Includes the Following Items: Your Choice of Camshaft Includes TSP .660" Dual Spring Kit w/ PAC Racing Polished Springs, Titanium Retainers, Hardened Spring Seats, and New Valve Stem Seals Texas Speed Hardened Chromoly Pushrods 8620 Cam Core available upon request* We have two options listed for our dual valve spring kits. The default option will use our PRC integrated one-piece seat and seal that simply pushes in place. The other option is for the separate two-piece seat and seal that you typically find in any dual valve spring kit. The two-piece kit will require separate installation of the valve seals after the seats are in place, and it does require a specific tool to make sure that the valve seals are installed properly (i.e. not crooked, torn, or not installed fully). Our integrated seat and seal will make your installation much easier because it is virtually impossible to install it incorrectly! You can choose either kit for no additional charge. We have a picture listed when you select each spring kit so you can see the actual differences in the two kits. This is the perfect upgrade package for customer looking for all the aftermarket parts needed to do a camshaft swap. Typical gains will range from 30 to 65 rear-wheel horsepower from a TSP camshaft swap alone! We do offer the optional adjustable pushrod length checker that allows you to verify the correct pushrod length needed for your setup. We can give you a good idea of what is typically used with your engine, lifter brand, etc., but it can certainly vary from setup to setup. You can vary up to .050" in pushrod length depending on which camshaft core the cam manufacturer uses! This is NOT information that any camshaft manufacturer includes with their camshafts, so it is always best to verify the length you need to avoid any valvetrain issues. Because we cannot stock every camshaft with every lobe separation angle, if you need parts quickly, we encourage you to call us to check availability of the camshaft you want. The LSA(s) we typically stock for each camshaft is listed next to each camshaft. Some camshafts will have to be custom ground and drop-shipped from the manufacturer directly to you!