LS JEEP/LAND CRUISER COMPLETE MOTOR MOUNT KIT *BLACK TEXTURED POWDER COAT*

$159.99

Patented Design engine mounts are for installing the 1997-2013 Gen III/IV LS series engine into any street rod or hot rod frame configuration. They are slotted for front to back adjustment with engine placement in the engine compartment. Most engine mounts only allow you to position the engine in one location, not allowing you to change transmissions in the future without major reconstruction of the transmission cross member.
Read More
SKU: DD-LS-SR-CM
Add to wishlist

  • Patented Design engine mounts are for installing the 1997-2013 Gen III/IV LS series engine into any street rod or hot rod frame configuration. They are slotted for front to back adjustment with engine placement in the engine compartment. Most engine mounts only allow you to position the engine in one location, not allowing you to change transmissions in the future without major reconstruction of the transmission cross member. Our mounts will allow you to move the engine forward or rearward with up to 3 inches of travel. These are offered as just the engine mounts, or a complete engine mount package. The isolators in the mount package are hyper-flex polyurethane. Designed with adjustable holes in the engine mounts and the frame mounts. The frame side mount can be trimmed up to an inch per side allowing these to fit chassis from 19.125" to 26.75" inside frame width.

    * Welded and cooled in a jig to retain precision alignment.

    * Sold as a pair, grade-8 hardware included.

    * These mounts will not clear low mount a/c. They will clear low mount alternator but the amount of adjustment is limited.

    APPLICATION GUIDE:

    Jeep CJ10 (81-85)

    Jeep CJ5 (72-86)

    Jeep CJ6 (72-75)

    Jeep CJ7 (76-86)

    Jeep CJ8 (81-86)

    Jeep Grand Wagoneer (72-84)

    Jeep J series Truck (81-85)

    Jeep SJ Cherokee (72-84)

    Jeep Wagoneer (72-84)

    Jeep Willys Wagon (46-65)

    Jeep YJ (87-95)

    Toyota Land Cruiser FJ40 (63-84)

    Toyota Land Cruiser FJ55 (67-80)

    Toyota Land Cruiser FJ60 (81-87)

    Toyota Land Cruiser FJ62 (88-90)

Info

PSI specializes in the design and manufacture of Standalone Wiring Harnesses for GM Gen II, III, and IV LS based engines and transmissions. These harnesses include the Gen II LT1/LT4, Gen III (24x) LS1/LS6 and Vortec Truck Engines as well as Gen IV (58x) LS2, LS3 and LS7 Engines. In addition to wiring harnesses, you will find other components and kits for retrofitting older vehicles with these powertrains including PCM programming, Fuel Pump Kits, Engine Sensors, Extension Harnesses, Replacement GM connector pigtails and a complete line of hardware to complete your conversion needs!

Contact Us

170 Oberlin Ave North, Unit 13
Lakewood, NJ 08701
ph. 732.444.3277
PSI
  • Paypal
  • Visa
  • Mastercard
  • American Express
  • Discover
X

Your Cart

0
My Cart

No items in your cart