LS3 Camaro - Factory Location Billet Low Mount Alternator Bracket Kit w/ Pulley

LS3 Camaro Billet Alternator Bracket

Compatible with: LS3/L99 Camaro (or truck/SUV ) crank pulley (ICT# BAL300)

Compatible with these "wide bolt" pattern alternators: Corvette/CTSV or 2010-15 LS3 Camaro
When using an iron block, we recommend using our front support bracket to add the 3rd mounting point for the alternator bracket SKU 551921-LS01.
If needing to extend your alternator harness connection, use ICT# WEALT30-36 (4-pin) or WEALT40-36 (2-pin)
Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
Includes: front & rear bracket, idler pulley, and mounting hardware

**This can only be used on blocks with at least 2 mounting holes on the front of the block. Blocks that only have 1 mounting hole will require drill template 551445 to drill (letter R) and tap (M10-1.5mm) the hole

Looking for an Affordable, In Stock, Plug and Play wiring harness for your LS Swap? PSI sells Standalone Wiring Harnesses for GM Gen II, III, IV, & V LS/LT based engines and transmissions. These harnesses include the Gen II LT1/LT4, Gen III (24x) LS1/LS6 and Vortec Truck Engines as well as Gen IV (58x) LS2, LS3, LS7, & Vortec and GEN V LT / ECOTEC3 Engines. All PSI Harnesses are Made in the USA and are 100% Computer Quality Tested. In addition to wiring harnesses, PSI carries Holley Products, Vintage Air A/C, Dakota Digital Gauges, HPTuners and PCM programming, Fuel Pump Kits, Engine Sensors, Extension Harnesses, Replacement GM connector pigtails and a complete line of hardware to complete your conversion!

My Cart

LS3 Camaro - Factory Location Billet Low Mount Alternator Bracket Kit w/ Pulley

LS3 Camaro Billet Alternator Bracket

Compatible with: LS3/L99 Camaro (or truck/SUV ) crank pulley (ICT# BAL300)