PSI FAQ's | Standalone Wiring Harness | LS Wiring | LS Wiring Harness | ECM | PCM | TCM | LS | LS1 | LS2 | LS3 | LS6 | LS7 | LS9 | LSA | Vortec | 24X

FREQUENTLY ASKED QUESTIONS

Below is a comprehensive list of the frequently asked questions we receive via our email contact form.

If you have a question about install you can click below, or you can email us at Techsupport@psiconversion.com

Click below for General Installation questions, if you are having problems installing your wiring harness these tips may help.

Click below if your swap vehicle won't start, these are the two most popular reasons why.

Click below for driveablility questions, if your swap runs and drives but has minor issues these tips might help.

Click below for answers related to transmission issues you may be having with your swap.

Looking for an Affordable, In Stock, Plug and Play wiring harness for your LS Swap? PSI sells Standalone Wiring Harnesses for GM Gen II, III, IV, & V LS/LT based engines and transmissions. These harnesses include the Gen II LT1/LT4, Gen III (24x) LS1/LS6 and Vortec Truck Engines as well as Gen IV (58x) LS2, LS3, LS7, & Vortec and GEN V LT / ECOTEC3 Engines. All PSI Harnesses are Made in the USA. In addition to wiring harnesses, PSI carries Holley Products, Vintage Air A/C, Dakota Digital Gauges, HPTuners and PCM programming, Fuel Pump Kits, Engine Sensors, Extension Harnesses, Replacement GM connector pigtails and a complete line of hardware to complete your conversion needs!

My Cart

About

Help

My Account

Contacts