TSP Stage 3 Cathedral Camshaft - Torquer v4

TSP Cathedral Heads Stage 3 Cam Specs: 231/234 .629"/.615" 111 LSA The Stage 3 (Torquer v4) camshaft features a more aggressive intake lobe that requires a good double valve spring kit. For customers looking for a quality double valve spring kit, we recommend the PAC .660" double spring kits. The new more aggressive intake lobes & small changes to the camshaft design has allowed us to create more peak power while bringing power in earlier than the Torquer V2. With the Stage 3 camshaft we typically recommend the customer have at least a 3200-rpm stall converter for automatic cars. Tuning will also be required in both automatic & manual applications. Engines best suited for: Cathedral Heads - LS1, LS2, & LS6 Desired Compression ratio for cam: 10.5:1+ Recommended Springs Required: TSP/PAC Double .660 Valve Springs Aftermarket Stall Converter Required: Yes, 3200+ Upgraded Rear Gear Required: 3.23 Minimum, 3.42+ is more optimal for maximum performance Operating RPM Range: 2200-7000 Estimated Power Increase: 55-60+ Fit Stock Untouched Heads: Yes, No Piston to Valve Clearance issues, but measuring is always recommended for any cam installation. Drivability: Manuals might have slight bucking/surging but can still be daily driven once a proper tune is in place. Automatics with a good stall converter will handle the cam no problem with proper tuning. For more information and help regarding camshaft selection, give us a call at 512-863-0900 and speak with one of our knowledgeable sales reps to discuss your camshaft needs!