TSP Stage 2 LS3 N/A Camshaft

TSP's all-new line of LS3 camshafts are the result of our latest round of engine dyno camshaft development using our state-of-the-art Superflow 902 engine dyno. Using a brand new LS3 crate engine, we started from scratch to build the most powerful LS3 camshafts available in the country. Texas Speed & Performance continues to test and develop new designs to make sure that our customers have the BEST camshafts available! The 229/244 camshaft is a great mid-duration camshaft for power applications from 3000 RPM+. This camshaft is an excellent choice for customers wanting more power than our 225/236 yet still wanting to retain nice streetability. Automatic-equipped vehicles will require a minimum stall speed torque converter of 2,600 RPM. We recommend this camshaft for LS3 or LS2 engines using L92/LS3 rectangle port cylinder heads! Specs: 229/244 .629"/615" 112 LSA, 109 ICL (Other LSAs Available) Camshaft Peak Gain HP/TQ Peak HP/RPM Peak TQ/RPM Avg. HP 3000-6000 RPM Avg. TQ 3000-6000 RPM Stock -- 484 @ 5700 479 @ 4300 399.4 441.4 229/244 112 LSA 84/27 568 @ 6500 506 @ 5300 430.4 471.5 **The factory LS3 camshaft uses a single-bolt cam design, which means one bolt holds the upper timing sprocket on the camshaft. For LS3 vehicles, you can either go back in with a single-bolt camshaft or convert to the three-bolt camshaft design that the 1997-2006 LS-based vehicles use. The three-bolt conversion kit will supply the correct 4x upper timing gear to supply the correct camshaft position signal, as well as the ARP camshaft bolt kit that will supply the three required bolts. We also offer the conversion kit with a complete, upgraded timing set for those wanting to replace the entire set.**