PCS LED Gear Indicator (Round or Square Gauge)

The PCS Gear Indicator scans your vehicle’s CAN bus and displays current gear data allowing you to monitor the actual current gear used by the transmission. The LED display brightness automatically adjusts to match surrounding ambient light levels. The module automatically enters a low-power standby mode when no activity is detected on your vehicle’s CAN bus ensuring low battery drain when not in use. 

Square Indicator: The data is displayed on a 5x8 LED dot-matrix display housed in a rugged plastic enclosure.

Round Indicator: The round displays are built with an aluminum housing and either black anodized finish, or polished. 

Features: 

• Autoscans to determine CAN standard used on vehicle. No user setup is required
• 5x8 LED matrix used to display characters P, N, R, 1, 2, 3, 5, 6, 7, 8
• GDS Series (Square): Display brightness automatically adjusts to match ambient light levels
   GDR Series (Round): Detects headlight status. If 12V is present on orange wire, display will dim for “Night Mode.”
• Power, Ground, CANH, and CANL are the only necessary connections.
• Rated for 12V - 24V nominal battery voltage

Installation:

The gear display requires only Power, Ground, CANH and CANL for operation.