APPLICATION: 2008, 2009, 2010, 2011, 2012, 2013, 2014 58X Corvette/Camaro LS, Vortec Truck, LS3, LH6, LY5, LMG, LH8, LY6, L96, L92, L9H, L76, L77, L99, LS3, LS7, LS376 480 & 525 GM Crate engines with 6L80E/6L90E Transmissions
CLICK FOR COMPONENT ID GUIDE
SEE DESCRIPTION BELOW FOR INCLUDED PARTS
*Don't forget to Mail In your Customer Supplied T43 TCM (located inside your 6L80e transmission). Here is a VIDEO to help with the removal and installation of the TCM.
PARTS INCLUDED: Complete Engine Wiring Harness (4 Wire Hookup), Programmed Engine Controller (PCM-1009), Tuning for your Customer Supplied T43 TCM, Accelerator Pedal (ACC-1007), LS3 Cartridge Mass Air Flow Sensor (ACC-1005), Mass Air Flow Sensor Holder, Oxygen Sensors x2 (ACC-1003)
NOTES: This COMPLETE controller kit from PSI includes everything you need to get that LS3 engine and Overdrive Transmission running in your project vehicle. Why use an aftermarket controller for your transmission when you can utilize the Factory controller just like the original vehicle! The kit includes hardware and components that don't typically come with used engines, such as the wiring harness, mass airflow meter, pedal, oxygen sensors, oxygen sensor bungs, and programmed ECM/TCM - eliminating the need to source them separately. This controller system is a true stand-alone system for use in older vehicles, as all that's needed to get a vehicle running with it are power and ground sources, a 58-psi (400 kPa) fuel pump and an electric cooling fan.
CONNECTIONS FOR:- Fuse/Relay Box
- Fuel Pump Control (Relay included)
- Fan controls (Relays and fuse available separately KIT-1010)
- Check Engine Light, Speedo output, Tachometer, OBD2 Port
- IAC and TPS on DBC setups
- MAF Sensor
- MAP Sensor
- Engine Coolant Temp Sensor
- Alternator Control
- (2) Upstream Oxygen Sensors
- Crankshaft Position
- Camshaft Position
- Fuel Injectors
- Coil Pack Sub-Harness
- Automatic or Manual Transmission control
- Knock Sensors
| Connections from the Harness You Will Need to Hookup:- Fuel Pump (Required)
- Switched Ignition Power (Required)
- Malfunction Indicator (Check Engine, MIL, CEL, ETC.)
- Speedometer
- Tachometer
- Fan 1 Relay Control (Low Speed or Single Control)
- Fan 2 Relay Control (High Speed or Second Fan Control)
- Fan Relays available separately KIT-1010
|
These harnesses are designed for retrofitting 2008 2009 2010 2011 2012 2013 2014 2015 2016 LS3 engines (Corvette, Camaro, Vortec Truck, & 2017 2018 2019 2020 2021 2022 2023 2024 LS Gen IV Crate Engines from Chevy Performance, Pace Performance, Blueprint Engines, Texas Speed, Scoggin Dickey etc) 2007 2008 2009 2010 2011 2012 2013 2014 6.2 6.2 5.3 and 4.8 Vortec Truck, Silverado, Sierra, Suburban, Tahoe, Yukon, Yukon XL, Avalance, Escalade, and Van engines using a 6L80E/6L90E automatic transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation.
Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications.
