1964-1972 GM A-body Corner Max Kit - Spindles Included

INSTALLATION NOTE: TRIMMING THE UPPER FRAME SPRING POCKET IS REQUIRED

UMI’s Corner Max front end kits are a comprehensive system with our best corner carving parts under one easy to find part number. The Corner Max system combines geometry corrected a-arms with a combination of tall spindles and ball joints, higher rate springs, Viking shocks, heavy duty sway bar and a bump steer kit. The addition of tall 2” drop spindles with taller ball joints greatly improves camber gain and allows for a low center of gravity. The foundation of the kit includes our coilover-only lower a-arms featuring caster improvement, quality ball joints, and the ability to remove the spring and shock without taking the spindle apart. The upper a-arm features rod ends for smooth operation and the ability to adjust without shims. The 1-⁵/₁₆” sway bar upgrade complete with UMI’s fabricated end links reduces body roll and helps speed transitions. Racing coilover springs are paired with Viking shocks. Fine tuning is accomplished with a UMI bump steer kit. The Corner Max kit is built to make the stock GM clip work as well as it possibly can with a true bolt-on kit. All UMI Performance parts are fabricated and raced with pride out of Philipsburg, PA – USA. Race proven on the UMI LeMans.

Features:

• Exceptional handling at 2-3” lowering. Included drop spindle allows additional lowering over factory spindle.
• Up to 10 degrees static caster without moving spindle pin.
• Up to 1.2 degrees per inch camber gain.
• 1.75” taller spindle with 2” drop and ½” tall upper ball joint.
• Easily change shocks and springs at the track with UMI’s unique quick change system.
• 850 lb/in race proven spring rates for exceptional handling.
• Viking shocks.
• 1-⁵/₁₆” solid sway bar with swivel end links to balance kit properly.
• Bump steer kit for fine tuning.
• Thrust bearings and adjusting wrench included for easy height changes.
• Raced and tested on UMI’s 1972 LeMans test car.
• All UMI suspension components are designed and manufactured in the USA.