LS/Vortec engine PCM programming service - customer supplied PCM (Red/Blue) 411 P01 **PROGRAMMING FOR PCM. PCM IS NOT INCLUDED**

NOTE: FOR USE WITH PSI HARNESSES ONLY

APPLICATION: 1997-2007 LS and Vortec gen 3 drive by cable and drive by wire engine swaps, and 2007-2018 gen 4 drive by cable throttle conversions.

PARTS INCLUDED: PROGRAMMING FOR 411 P01 RED/BLUE PCM. PCM NOT INCLUDED.                             

To purchase a PCM use P/N: PCM-1003

A PSI PCM is the perfect complement to your PSI harness as they are tuned according to your specifications to match your setup. With PSI’s 2 decades of tuning experience, we ensure your PCM is programmed with the appropriate operating system for your engine and transmission combination along with calibrating it for the appropriate displacement, mass air flow sensor use, injector style and flow rate, throttle body type, tire size and gear ratio. Your PCM will be tuned to operate as closely to an OEM tune as possible based on your specific application; all builds are different and the same engine build between different vehicles, in different locations, being used for different purposes, will require a custom tune to get the vehicle dialed in for your particular setup. Because of this our computers are not locked so the included base tune can be adjusted to reach the goals you’re trying to achieve.

PSI programming includes the following:

• Correct Operating System for your Engine and Transmission Combination
• Removal of Vehicle Anti-Theft System (VATS)
• Lowering of Cooling Fan Temperatures (Fan #1 ON at 195F, Fan #2 ON at 205F)
• MAF Sensor
• Fuel Injector Flow Rate
• MAP Sensor
• Throttle Body Used
• Alternator Settings (2 Pin or 4 Pin)
• Updates for Correct Tire Size and Gear Ratio

WARNING: The installed tune is a base/startup tune, mirroring a factory OEM tune based on the options selected in your order. The tune will remove the VATS (Vehicle Anti-Theft System), bypass VVT (if applicable), disable DOD (if applicable), and remove any restrictions preventing operation of the engine when installed in a different vehicle.

If the engine has a different camshaft, ANY performance modifications, or has any components that differ from options selected on your tune request the following issues may occur: No start, erratic idle, surging, check engine lights, limp mode, lack of shifting, no throttle response, poor power delivery, and other issues possibly rendering the engine inoperable. Any engine or transmission modifications will REQUIRE a custom tune to ensure proper operation and prevent serious damage. PSI Conversion cannot be held responsible for issues related to operation or performance when the engine/transmission has been modified, or varies from the options selected when the tune was installed.